Katco :: Kapton, Mylar, Cirlex, Polyimide film, melinex, Kapton adhesive film, Nomex, masking dots, PCB making tape, Teflon, Tefzel, polymide, FEP film, Ultem Katco :: Kapton, Mylar, Cirlex, Polyimide film, Melinex, Kapton adhesive film, Nomex, masking dots, PCB making tape, Teflon, Tefzel, polymide, FEP film, Ultem
Tel: +44 (0)1442 838 150      Fax: +44 (0)1442 838170       E-mail: sales@katco.eu
Kapton® Polyimide Film

Kapton® polyimide film possesses a unique combination of properties. The ability of Kapton® to maintain its excellent physical, electrical and mechanical properties over a wide temperature range has opened new design and application areas for plastic films.

Kapton® is extensively used for aerospace, printed circuit and traction motor applications, operating up to 400°C. It has proved to be an indispensable material for advanced applications. The primary types of Kapton® are:

  • Kapton® HN - Used for the majority of applications, where its properties are required over a wide temperature range. The standard sizes are shown below.
  • Kapton® FN - Where heat sealabfility is required. Kapton® is combined with Teflon® FEP resin. It is commonly used for lapping of copper conductors in electric motors and aerospace wires.
Kapton® HN     Standard Rolls     610mm wide
Thickness and type Thickness microns Length of roll
M
Yield
M²/kg
50HN 12.5 914 56.0
100HN 25 457 28.0
200HN 50 232 14.0
300HN 75 152 9.2
500HN 125 91 5.5

Kapton® die cut parts mounted on a release liner

Short Roll Service:   Kapton® HN is normally supplied in standard rolls, however Katco also provides short rolls from 5 linear metres long x 610mm wide.

Additionally, we supply slit width rolls, die-cut and punched components as well as adhesive coated Kapton®.

Other grades of Kapton® may be obtained by special request.

Type Description Type Description
XP As FN but with PFA instead of FEP. XC Electrically conductive with a resistance of 150 to 109 ohms/sq.
FPC As VN with surface treated for PCB use. BCL-Y For bar code industry.
HPP-ST As HN but for adhesive tape production. CR Corona resistance for high voltage AC applications.
MT For thermal conductivity. FCR As CR but with FEP.
MTB As MT but black, for better thermal radiation. FWR As WR but with FEP.
CB Thermal conductivity, black. RS Kapton heater film
Kapton® is a DuPont Registered Trade Name
CIRLEX®

Information on CIRLEX® polyimide sheet is available here.

©Katco 2008 All Rights Reserved